USB-Boot (en) USB-Boot (en) USB-Boot (en)
Start | Impressum & Datenschutz | Sitemap | Suche
Login/LogoutSucheTermineThinClient-ProjektTYPO3 goes eComStationVerein, allgemeinVereinslokalitätVereinspersonaliaVorträge/VortragsreihenWeb-LinksWikisIBM-8364-S20 (de)USB-Boot (en)USB-Tricks (de)Impressum Druckansicht          Startseite  Wikis  USB-Boot (en)  

[Article: Wiki-eCS-OS/2-USB-Boot-en--PRM-LVM-Config-sys | Discussion ]
HomePage Reload page Edit Versions Download HTML

Tip: If your coming via link from Google search results to this "SubWiki",
     please click on the Home Icon at the upper right corner area to go to
     the main Wiki "Howto Boot OS/2 - eCS from USB Mass Storage Devices ( MSD )"
     


Case: Boot from USB PRM MSD LVM System

config.sys booting to command prompt ( with only a little cleanup, just from the test bench -:)

  rem
  rem  config.sys with usb statements arranged according "I13" boot sequence
  rem
  rem             and without drive letter C: in statements
  rem
  rem    Statements, that do require an drive letter: 
  rem 
  rem    SWAPPATH=C:\OS2\SYSTEM 512
  rem
  rem    DISKCACHE=D,LW,AC:+C
  rem
  rem    PROTSHELL=C:\OS2\cmd.exe
  rem    SET OS2_SHELL=C:\OS2\cmd.exe
  rem    SET COMSPEC=C:\OS2\cmd.exe
  
  EARLYMEMINIT=TRUE
  PRIORITY_DISK_IO=NO
  
  pauseonerror=YES
  
  rem SET SAVECONNECT=1
  rem SET COPYFROMFLOPPY=1
  
  RESERVEDRIVELETTER=M
   
  LIBPATH=.;\OS2\DLL;
  SET PATH=\OS2;
  SET DPATH=\OS2;
  SET LANG=de_DE
  SET ULSPATH=\language
  DEVICE=\OS2\unicode.sys
    
  rem IFS=\OS2\cdfs.ifs /Q /W
  rem IFS=\OS2\hpfs.ifs /CACHE:1024 /AUTOCHECK:*
  rem IFS=\OS2\udf.ifs /V
  
  BASEDEV=ibmkbd.sys
  BASEDEV=chkdsk.sys
   
  rem ======================== USB Section Start
  
  BASEDEV=USBD.SYS /V /I13
     
  BASEDEV=usbuhcd.sys /V
  BASEDEV=usbuhcd.sys /V
  BASEDEV=usbuhcd.sys /V
  
  BASEDEV=usbhid.sys /V
  
  BASEDEV=usbmsd.add /V /FLOPPIES:0  /REMOVABLES:1  
  
  
  device=delay.sys /K :30 delay.sys: End of USB section, 30 sec pause or press any key
  
  rem ======================== USB Section Ende
    
   
  rem BASEDEV=ibm1flpy.add /A:0 /FORCE:2 /U:0 /F:1.44MB /U:1 /F:1.44MB
  
  rem str0 basedev=ibm1s506.add /V
  rem str1 basedev=ibmatapi.flt /V
  rem str1 basedev=IBMIDECD.FLT /V
  rem str2 basedev=ibmatapi.flt /A:1 /U:0 /TYPES:CLZ /V
  
  BASEDEV=danis506.add /VL
   
  rem str4 BASEDEV=danis506.add /VLL /A:1 /BAY
  rem str4 BASEDEV=daniatap.flt /V /A:1 /U:0 /TYPE:W
   
   
  rem ======================== DASD Driver Section 
   
  BASEDEV=os2dasd.dmd /V
  BASEDEV=os2lvm.dmd  /V
  
  REM ===============================================
   
  COUNTRY=049,\OS2\country.sys
  CODEPAGE=850
  DEVINFO=KBD,GR,\OS2\keyboard.dcp
  DEVINFO=SCR,VGA,\OS2\viotbl.dcp
  
  rem DEVICE=C:\OS2\os2cdrom.dmd
  rem BASEDEV=os2aspi.dmd /ALL
  
  DEVICE=\OS2\testcfg.sys
  DEVICE=\OS2\dos.sys
  DEVICE=\OS2\pointdd.sys
  DEVICE=\OS2\mouse.sys
  
  BASEDEV=print01.sys /IRQ
  PRINTMONBUFSIZE=134,134,134
  
  rem str DEVICE=C:\OS2\apm.sys
  rem str RUN=C:\OS2apmdaemn.exe
  
  SET TEMP=C:\Temp
  SET TMP=C:\Temp
  
  SUPPRESSPOPUPS=C
  MEMMAN=SWAP,PROTECT
  SWAPPATH=C:\OS2\SYSTEM 512
  IOPL=YES
  PROTECTONLY=YES
  AUTOFAIL=YES
  THREADS=1024
  DISKCACHE=D,LW,AC:+C
  MAXWAIT=1  
  
  SET VIDEO_DEVICES=VIO_VGA
  SET VIO_VGA=DEVICE(BVHVGA)
  SET TZ=CET-1CES,3,-1,0,7200,10,-1,0,10800,3600
  SET PROMPT=$i[$p]
  SET KEYS=ON
  
  PROTSHELL=C:\OS2\cmd.exe
  SET OS2_SHELL=C:\OS2\cmd.exe
  SET COMSPEC=C:\OS2\cmd.exe



Last changed: 21.05.2010 18:12 by Rainer D. Stroebel - HomePage Reload page Edit Versions Download HTML

Druckansicht          Startseite  Wikis  USB-Boot (en)  
Vereinstermine