USB-Boot (en) USB-Boot (en) USB-Boot (en)
Start | Impressum & Datenschutz | Sitemap | Suche
Login/LogoutSucheTermineThinClient-ProjektTYPO3 goes eComStationVerein, allgemeinVereinslokalitätVereinspersonaliaVorträge/VortragsreihenWeb-LinksWikisIBM-8364-S20 (de)USB-Boot (en)USB-Tricks (de)Impressum Druckansicht          Startseite  Wikis  USB-Boot (en)  

[Article: Wiki-eCS-OS/2-USB-Boot-en--Bug-Geo | Discussion ]
HomePage Reload page Edit Versions Download HTML

Kingston CF 64 GB and CF 128 MB Card with MBR Record wiped to zero by DFSEE


Contents

[Edit]1 CF 64 MB ThinkPad T23 CF-Card in UltraBay with CF-to-IDE Adapter - IBM1S506.ADD


USB-Boot-CF-64-to-IDE.png

Bild: USB-Boot-CF-64-to-IDE.jpg

   driver: IBM1S506.ADD bldlevel 10.161

[Edit]1.1 CF 64 MB Card GEO displayed at boot

USB-Boot-IBM1S506-add-Output-Screenshot.png

Bild: USB-Boot-IBM1S506-add-Output-Screenshot.JPG

  values transcribed from JPG:
  Controller:1  Port:0170 IRQ:000F  Status:OK Bus Master DMA Scatter/Gather
  PCI Rev:2.1 Intel 82801CA PCI ICH Rev:01  VID:8086 DID:248A 
  Unit:0 Status:OK LBA PIO0 BIOS
   Model:TOSHIBA THNCF064MMA                     3.00 
   Drive has valid Enhanced BIOS extensions Version 48
   OS2:log   phys   BIOS:log  BPB:log   IDE:log   phys     Total Sectors
  C    993    978        992                978    978   Avail     125184
  H      2      4          2        0         4      4   OS2       125118
  S     63     32         63        0        32     32   % Used     99.95


[Edit]1.2 CF 64 MB Card Geo displayed by DFSEE 8-10 ( map -M -m command )

   P-Geo Disk 2 Cyl :   978 H:  4 S:63  Bps:512   Size : 0x0001E900 =    61.1 MiB
   L-Geo Disk 2 Cyl :   993 H:  2 S:63  Bps:512   Size : 0x0001E8BE =    61.1 MiB
   BIOS Int13 limit : none, no limit
   MBR crc 8bff08f2 : 0x88bad147 = Bootcode not present. Disk is NOT bootable!
   WARNING disk nr 2 : Master boot record is not valid, no partitions recognized


[Edit]2 CF 64 MB ThinkPad T23 CF-Card in UltraBay with CF-to-IDE Adapter - DANIS506.ADD

  driver: DANIS506.ADD bldlevel 1.7.7

[Edit]2.1 CF 64 MB Card GEO displayed at boot ( values from IBMS506$ )

  Controller:1  Port:0170 IRQ:0F  Status:OK
  Intel ICH3 PATA host (8086:248A rev:01) on PCI 0:31.1 @33MHz
  Unit:0 Status:OK LBA PIO0 Identify
   Model:TOSHIBA THNCF064MMA                     3.00  
   OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
  C    978    978                  978    978   Avail     125184
  H      4      4          0         4      4   OS2       125184
  S     32     32          0        32     32   % Used    100.00


[Edit]2.2 CF 64 MB Card Geo displayed by DFSEE 8-10 ( map -M -m command )

  P-Geo Disk 3 Cyl :     0 H:  0 S:0   Bps:512   Size : 0x00000000 =     0.0 KiB
  L-Geo Disk 3 Cyl :   978 H:  4 S:32  Bps:512   Size : 0x0001E900 =    61.1 MiB
  BIOS Int13 limit : none, no limit
  MBR crc 8bff08f2 : 0x88bad147 = Bootcode not present. Disk is NOT bootable!
  WARNING disk nr 3 : Master boot record is not valid, no partitions recognized
  ( Comment: Drive 2 a dummy drive for UltraBay )


[Edit]3 CF 64 MB ThinkPad T23 CF-Card in USB Card Reader - USBMSD.ADD

USB-Boot-USB-Card-Reader-and-64MB-CF-Card.png

Bild: USB-Boot-USB-Card-Reader-and-64MB-CF-Card.jpg

  driver: USBMSD.ADD   10.162
          OS2DASD.DMD  10.104
          OS2LVM.DMD   10.105

[Edit]3.1 CF 64 MB Card GEO displayed at boot / insert by drivers

    N/A


[Edit]3.2 CF 64 MB Card Geo displayed by DFSEE 8-10 ( map -M -m command )


  P-Geo Disk 2 Cyl :     0 H:  0 S:0   Bps:512   Size : 0x00000000 =     0.0 KiB
  L-Geo Disk 2 Cyl :    61 H: 64 S:32  Bps:512   Size : 0x0001E800 =    61.0 MiB
  BIOS Int13 limit : none, no limit
  MBR crc 8bff08f2 : 0x88bad147 = Bootcode not present. Disk is NOT bootable!
  WARNING disk nr 2 : Master boot record is not valid, no partitions recognized

Kingston CF 64 GB Card with MBR Record wiped to zero by DFSEE


[Edit]4 CF 64 MB Type "extra ME" Thin Client 8364-S20 - DANIS506.ADD

  driver: DANIS506.ADD bldlevel 1.7.10

[Edit]4.1 CF 64 MB Type "extra ME" Card GEO displayed at boot ( values from IBMS506$ )

R1.7.10      /W
Daniela's Bus Master IDE Driver for OS/2 Version 1.7.10
Controller:0  Port:01F0 IRQ:0E  Status:OK
Intel PIIX4 PATA host (8086:7111 rev:01) on PCI 0:5.1 @33MHz
Unit:0 Status:OK LBA PIO0 BPB
 Model:Flash Card                              02/02/05
  OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
 C     62    500                  500    500   Avail     128000
 H     64      8         64         8      8   OS2       126976
 S     32     32         32        32     32   % Used     99.19
      
 Comments:
     
 64 MB CF Card Type "extra ME" size is 1 MB more compared to 64 MB Card Type "Kingston"   
 Different P-GEO and L-GEO  - Status: Card is not wipe, MBR written by IBM1S506, USBMSD?
  
 Why are OS2-log and BPB and IDE-phys not all eQual? any sense?  
 
 

[Edit]5 CF 128 MB ThinkPad T23 CF-Card in UltraBay with CF-to-IDE Adapter - IBM1S506.ADD

USB-Boot-CF-128-to-IDE.png

Bild: USB-Boot-CF-128-to-IDE.jpg

   driver: IBM1S506.ADD bldlevel 10.161


[Edit]5.1 CF 128 MB Card GEO displayed at boot

USB-Boot-CF-128-IBM1S506-add-Output-Screenshot.png

Bild: USB-Boot-CF-128-IBM1S506-add-Output-Screenshot.JPG

  values transcribed from JPG:
  Controller:1  Port:0170 IRQ:000F  Status:OK
  PCI Rev: 2.10 Intel 82801CA PCI ICH Rev:01 VID:8086 DID:248A
  Unit:0 Status:OK POI8 PBP
   Model:Hitachi XXM2.3.0                     3.00 
   Drive has valid Enhanced BIOS extensions Version 48
   OS2:log   phys   BIOS:log  BPB:log   IDE:log   phys     Total Sectors
   C    122    978        992                978    978   Avail     250368
   H     64      8          4       64         8      8   OS2       249856
   S     32     32         63       32        32     32   % Used     99.80


[Edit]5.2 CF 128 MB Card Geo displayed by DFSEE 8-10 ( map -M -m command )


[Edit]6 CF 128 MB ThinkPad T23 CF-Card in UltraBay with CF-to-IDE Adapter - DANIS506.ADD

[Edit]6.1 Driver: DANIS506.ADD bldlevel 1.7.7

[Edit]6.1.1 CF 128 MB Card GEO displayed at boot ( values from IBMS506$ R 1.7.7)

Controller:1  Port:0170 IRQ:0F  Status:OK
 Intel ICH3 PATA host (8086:248A rev:01) on PCI 0:31.1 @33MHz
Unit:0 Status:OK LBA PIO0 BPB
 Model:Hitachi XXM2.3.0                        Rev 3.00
  OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
 C    122    978                  978    978   Avail     250368
 H     64      8         64         8      8   OS2       249856
 S     32     32         32        32     32   % Used     99.79


[Edit]6.1.2 CF 128 MB Card Geo displayed by DFSEE 8-11 Beta( map -M -m command )

P-Geo Disk 2 Cyl :   978 H:  8 S:63  Bps:512   Size : 0x0003D200 =   122.3 MiB
L-Geo Disk 2 Cyl :   122 H: 64 S:32  Bps:512   Size : 0x0003D000 =   122.0 MiB
BIOS Int13 limit : none, no limit
MBR crc c51e1623 : 0x7ea9d168 = IBM OS/2 LVM, 14.105 May 2006, I13X
Comment: MBR present --> CF Card has been partitioned 

[Edit]6.2 Driver: DANIS506.ADD bldlevel 1.7.8

[Edit]6.2.1 CF 128 MB Card GEO displayed at boot ( values from IBMS506$ R 1.7.8)

R1.7.8       /W
Daniela's Bus Master IDE Driver for OS/2 Version 1.7.8
Controller:0  Port:01F0 IRQ:0E  Status:OK BusMaster Scatter/Gather
 Intel ICH3 PATA host (8086:248A rev:01) on PCI 0:31.1 @33MHz
Unit:0 Status:OK SMS:16 LBA NL:126 BusMaster UltraDMA5/PIO4 BPB
 Model:Hitachi HTS541616J9AT00                 SB4OA70H
  OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
 C  20673  65535                65535  16383   Avail  312581808
 H    240     16        240        16     16   OS2    312575760
 S     63     63         63        63     63   % Used     99.99
Controller:1  Port:0170 IRQ:0F  Status:OK
 Intel ICH3 PATA host (8086:248A rev:01) on PCI 0:31.1 @33MHz
Unit:0 Status:OK LBA PIO0 BPB
 Model:Hitachi XXM2.3.0                        Rev 3.00
  OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
 C    122    978                  978    978   Avail     250368
 H     64      8         64         8      8   OS2       249856
 S     32     32         32        32     32   % Used     99.79


[Edit]6.2.2 CF 128 MB Card Geo displayed by DFSEE 8-11 Beta ( map -M -m command )

P-Geo Disk 1 Cyl : 16383 H: 16 S:63  Bps:512   Size : 0x0FFFFFFF =  131071 MiB
L-Geo Disk 1 Cyl : 20673 H:240 S:63  Bps:512   Size : 0x12A18710 =  152624 MiB
BIOS Int13 limit : 1024 cylinders, limiting to Size : 7560.0 MiB
MBR crc c51e1623 : 0x7ea9d168 = IBM OS/2 LVM, 14.105 May 2006, I13X
P-Geo Disk 2 Cyl :   978 H:  8 S:63  Bps:512   Size : 0x0003D200 =   122.3 MiB
L-Geo Disk 2 Cyl :   512 H: 12 S:32  Bps:512   Size : 0x00030000 =    96.0 MiB
Error, disk 2 PD2 : reading the MBR info in the 1st sector failed!
DUMMY, disk 2 seems reserved with no media present (USB/PCCARD etc)
P-Geo Disk 3 Cyl :     0 H:  0 S:0   Bps:512   Size : 0x00000000 =     0.0 KiB
L-Geo Disk 3 Cyl :   122 H: 64 S:32  Bps:512   Size : 0x0003D000 =   122.0 MiB
BIOS Int13 limit : none, no limit
MBR crc c51e1623 : 0x7ea9d168 = IBM OS/2 LVM, 14.105 May 2006, I13X
Comment: MBR present --> CF Card has been partitioned 


snippet of config.sys ( mini system boot to command prompt )
BASEDEV=usbmsd.add /V /FLOPPIES:0  /REMOVABLES:1 /CDS:0 /REMOVEABLE_AS_FLOPPY
.
.   
BASEDEV=ibm1flpy.add /A:0 /FORCE:2 /U:0 /F:1.44MB /U:1 /F:1.44MB
.
rem BASEDEV=IBM1S506.add /W
rem BASEDEV=IBMIDECD.flt
.
BASEDEV=danis506.add /W
rem BASEDEV=daniatap.flt /W /A:1 /U:0 /TYPE:W
.
.
BASEDEV=os2dasd.dmd
BASEDEV=os2lvm.dmd


Output of Danis DiskInfo I ( from R 1.7.9 package)

0/m: Hitachi HTS541616J9AT00                  SB4OA70H       SB0400SJG0HW1A
ATA device, with non-removable media
       Model Number:       Hitachi HTS541616J9AT00               
       Serial Number:      SB0400SJG0HW1A
       Firmware Revision:  SB4OA70H

Standards:
       Supported: 7 6 5 4
       Likely used: 7
Configuration:
Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 312581808 device size with Mi= 1024*1024: 152628 MiBytes device size with M = 1000*1000: 160042 MBytes (160 GB) Capabilities: LBA, IORDY(can be disabled) Buffer type: 0003: dual port, multi-sector with read caching ability Buffer size: 7512.0kB Queue depth: 1 Standby timer values: spec'd by Vendor, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 128 (0x80 Recommended acoustic management value: 128, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set - Security Mode feature set * SMART feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command * Device Configuration Overlay feature set * 48-bit Address feature set - Automatic Acoustic Management feature set - SET MAX security extension - Address Offset Reserved Area Boot * SET FEATURES subcommand required to spinup after power up - Power-Up In Standby feature set * Advanced Power Management feature set * DOWNLOAD MICROCODE cmd * General Purpose Logging feature set * SMART self-test * SMART error logging Security: Master password revision code = 65534 * supported not enabled not locked * frozen
not expired: security count not supported: enhanced erase 82min for SECURITY ERASE UNIT. HW reset results: CBLID- above Vih Device num = 0 determined by the jumper Checksum: correct
0/s: (not present)
1/m: Hitachi XXM2.3.0                         Rev 3.00 X0312 20030915102722
CompactFlash ATA device, with removable media Model Number: Hitachi XXM2.3.0 Serial Number: X0312 20030915102722 Firmware Revision: Rev 3.00 Standards: Likely used: 4 Configuration: Logical max current cylinders 978 978 heads 8 8 sectors/track 32 32 -- bytes/track: 0 bytes/sector: 512 CHS current addressable sectors: 250368 LBA user addressable sectors: 250368 device size with Mi= 1024*1024: 122 MiBytes device size with M = 1000*1000: 128 MBytes Capabilities: LBA, IORDY(may be)(cannot be disabled) Buffer type: 0002: dual port, multi-sector Buffer size: 1.0kB bytes avail on r/w long: 4 Queue depth: 1 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 1 Current = 0 DMA: not supported PIO: pio0 pio1
1/s: (not present)


[Edit]7 CF 128 MB ThinkPad T23 CF-Card in USB Card Reader - USBMSD.ADD

xttp://os4you.org/fileadmin/wikis/usb-boot/USB-Boot-USB-Card-Reader-and-128MB-CF-Card.png

Bild: USB-Boot-USB-Card-Reader-and-128MB-CF-Card.jpg

  driver: USBMSD.ADD   10.162
          OS2DASD.DMD  10.104
          OS2LVM.DMD   10.105

[Edit]7.1 CF 128 MB Card GEO displayed at boot / insert by drivers

    N/A


[Edit]7.2 CF 128 MB Card Geo displayed by DFSEE 8-11 ( map -M -m command )

  testcase to do!!


[Edit]8 CF 1 GB ThinkPad T23 CF-Card in UltraBay with CF-to-IDE Adapter - DANIS506.ADD

[Edit]8.1 CF 1 GB Card from A-DATA

USB-Boot-CF-1-GB-to-IDE-A-DATA.png

Bild: USB-Boot-CF-128-to-IDE-A-DATA.jpg


[Edit]8.1.1 Driver: DANIS506.ADD bldlevel 1.7.9

New 1 GB CF Card out of the box without the wipping of the boot sector

[Edit]8.1.1.1 CF 1 GB MB Card (product: A-DATA) GEO displayed at boot ( values from IBMS506$ R 1.7.9)

R1.7.9        /W   
Daniela's Bus Master IDE Driver for OS/2 Version 1.7.9
Controller:0  Port:01F0 IRQ:0E  Status:OK BusMaster Scatter/Gather
 Intel ICH3 PATA host (8086:248A rev:01) on PCI 0:31.1 @33MHz
Unit:0 Status:OK SMS:16 LBA NL:126 BusMaster UltraDMA5/PIO4 BPB
 Model:Hitachi HTS541616J9AT00                 SB4OA70H
  OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
 C  20673  65535                65535  16383   Avail  312581808
 H    240     16        240        16     16   OS2    312575760
 S     63     63         63        63     63   % Used     99.99

Controller:1  Port:0170 IRQ:0F  Status:OK BusMaster Scatter/Gather
 Intel ICH3 PATA host (8086:248A rev:01) on PCI 0:31.1 @33MHz
Unit:0 Status:OK LBA BusMaster MWordDMA2/PIO4 BIOS
 Model:CF 1GB                                  20060911
  OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
 C   1007   2014                 1007   2014   Avail    2030112
 H     32     16         32        32     16   OS2      2030112
 S     63     63         63        63     63   % Used    100.00


[Edit]8.1.1.2 CF 1 GB Card (product: A-DATA) Geo displayed by DFSEE 8-11 Beta ( map -M -m command )

Number of disks   : 3
P-Geo Disk 1 Cyl : 16383 H: 16 S:63  Bps:512   Size : 0x0FFFFFFF =  131071 MiB
L-Geo Disk 1 Cyl : 20673 H:240 S:63  Bps:512   Size : 0x12A18710 =  152624 MiB
BIOS Int13 limit : 1024 cylinders, limiting to Size : 7560.0 MiB
MBR crc c51e1623 : 0x7ea9d168 = IBM OS/2 LVM, 14.105 May 2006, I13X
P-Geo Disk 2 Cyl :  2014 H: 16 S:63  Bps:512   Size : 0x001EFA20 =   991.3 MiB
L-Geo Disk 2 Cyl :  2014 H: 16 S:63  Bps:512   Size : 0x001EFA20 =   991.3 MiB
BIOS Int13 limit : 1024 cylinders, limiting to Size :  504.0 MiB
MBR crc 2f7d8cc7 : 0xaa3df0e4 = MBR bootcode unknown to DFSee
P-Geo Disk 3 Cyl :     0 H:  0 S:0   Bps:512   Size : 0x00000000 =     0.0 KiB
L-Geo Disk 3 Cyl :   512 H: 12 S:32  Bps:512   Size : 0x00030000 =    96.0 MiB
Error, disk 3 PD3 : reading the MBR info in the 1st sector failed!
DUMMY, disk 3 seems reserved with no media present (USB/PCCARD etc)


Wipe the MBR with DFSee and shutdown, power off - on, restart
DFSee 8-11 Beta 20007-02-15 shows the same values for L-GEO as in output of DANIS506  
Number of disks   : 3
P-Geo Disk 1 Cyl : 16383 H: 16 S:63  Bps:512   Size : 0x0FFFFFFF =  131071 MiB
L-Geo Disk 1 Cyl : 20673 H:240 S:63  Bps:512   Size : 0x12A18710 =  152624 MiB
BIOS Int13 limit : 1024, I13X support needed beyond : 7560.0 MiB
MBR crc c51e1623 : 0x7ea9d168 = IBM OS/2 LVM, 14.105 May 2006, I13X
P-Geo Disk 2 Cyl :  2014 H: 16 S:63  Bps:512   Size : 0x001EFA20 =   991.3 MiB
L-Geo Disk 2 Cyl :  1007 H: 32 S:63  Bps:512   Size : 0x001EFA20 =   991.3 MiB 
BIOS Int13 limit : none, no limit for this disk                                            
MBR crc 8bff08f2 : 0x88bad147 = Bootcode not present. Disk is NOT bootable!
WARNING disk nr 2 : Master boot record is not valid, no partitions recognized
P-Geo Disk 3 Cyl :     0 H:  0 S:0   Bps:512   Size : 0x00000000 =     0.0 KiB
L-Geo Disk 3 Cyl :   512 H: 12 S:32  Bps:512   Size : 0x00030000 =    96.0 MiB
Error, disk 3 PD3 : reading the MBR info in the 1st sector failed!
DUMMY, disk 3 seems reserved with no media present (USB/PCCARD etc)


[Edit]8.1.2 CF 1 GB MB ThinkPad T23 CF-Card in USB Card Reader - USBMSD.ADD

USB-Boot-USB-Card-Reader-and-1GB-CF-Card.png

Bild: USB-Boot-USB-Card-Reader-and-1GB-CF-Card.jpg

  driver: USBMSD.ADD   10.162
          OS2DASD.DMD  10.104
          OS2LVM.DMD   10.105

[Edit]8.1.3 CF 1 GB MB Card GEO displayed at boot / insert by drivers

    N/A


[Edit]8.1.4 CF 1 GB MB Card Geo displayed by DFSEE 8-11 ( map -M -m command )

  testcase to do!!

[Edit]8.2 CF 1 GB Card from A-DANE-ELEC

USB-Boot-1-GB-to-IDE-DANE-ELEC.png

Bild: USB-Boot-1-GB-to-IDE-DANE-ELEC.jpg


[Edit]8.2.1 Driver: DANIS506.ADD bldlevel 1.7.9

New 1 GB CF Card out of the box without the wipping of the boot sector

[Edit]8.2.1.1 CF 1 GB MB Card (product: DANE-ELEC) GEO displayed at boot ( values from IBMS506$ R 1.7.9)

R1.7.9       /W
Daniela's Bus Master IDE Driver for OS/2 Version 1.7.9
Controller:0  Port:01F0 IRQ:0E  Status:OK BusMaster Scatter/Gather
 Intel ICH3 PATA host (8086:248A rev:01) on PCI 0:31.1 @33MHz
Unit:0 Status:OK SMS:16 LBA NL:126 BusMaster UltraDMA5/PIO4 BPB
 Model:Hitachi HTS541616J9AT00                 SB4OA70H
  OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
 C  20673  65535                65535  16383   Avail  312581808
 H    240     16        240        16     16   OS2    312575760
 S     63     63         63        63     63   % Used     99.99
Controller:1  Port:0170 IRQ:0F  Status:OK
 Intel ICH3 PATA host (8086:248A rev:01) on PCI 0:31.1 @33MHz
Unit:0 Status:OK LBA PIO4 BPB
 Model:TOSHIBA THNCF1G02QG                     3.00    
  OS2:log   phys   BPB/BIOS   IDE:log   phys     Total Sectors
 C    992   1985                  992   1985   Avail    2000880
 H     32     16         32        32     16   OS2      1999872
 S     63     63         63        63     63   % Used     99.94

[Edit]8.2.2 CF 1 GB (product: DANE-ELEC) MB ThinkPad T23 CF-Card in USB Card Reader - USBMSD.ADD

USB-Boot-USB-Card-Reader-and-1GB-CF-Card-DANE-ELEC.png

Bild: USB-Boot-USB-Card-Reader-and-1GB-CF-Card-DANE-ELEC.jpg

  driver: USBMSD.ADD   10.162
          OS2DASD.DMD  10.104
          OS2LVM.DMD   10.105

[Edit]8.2.2.1 CF 1 GB MB Card (product: DANE-ELEC)GEO displayed at boot / insert by drivers

    N/A


[Edit]8.2.2.2 CF 1 GB Card (product: DANE-ELEC) Geo displayed by DFSEE 8-11 Beta ( map -M -m command )

Number of disks   : 3
P-Geo Disk 1 Cyl : 16383 H: 16 S:63  Bps:512   Size : 0x0FFFFFFF =  131071 MiB
L-Geo Disk 1 Cyl : 20673 H:240 S:63  Bps:512   Size : 0x12A18710 =  152624 MiB
BIOS Int13 limit : 1024 cylinders, limiting to Size : 7560.0 MiB
MBR crc c51e1623 : 0x7ea9d168 = IBM OS/2 LVM, 14.105 May 2006, I13X
P-Geo Disk 2 Cyl :  1985 H: 16 S:63  Bps:512   Size : 0x001E87F0 =   977.0 MiB
L-Geo Disk 2 Cyl :   512 H: 12 S:32  Bps:512   Size : 0x00030000 =    96.0 MiB
Error, disk 2 PD2 : reading the MBR info in the 1st sector failed!
DUMMY, disk 2 seems reserved with no media present (USB/PCCARD etc)
P-Geo Disk 3 Cyl :     0 H:  0 S:0   Bps:512   Size : 0x00000000 =     0.0 KiB
L-Geo Disk 3 Cyl :  1984 H: 16 S:63  Bps:512   Size : 0x001E8400 =   976.5 MiB
BIOS Int13 limit : 1024 cylinders, limiting to Size :  504.0 MiB
MBR crc 65f4cd2f : 0x01f61820 = VirtualPC or classic DOS


[Edit]9 Conclusion:

 CF 64 MB 
1   Point  1.2 Dfsee Value Phy  S 64 does not look okay, should be 32   
2   Point  1.1 OS2 Phy values does not look okay?
3   Point 2.1 and 3.2  Bios log values missing
4   3 diffenrent OS/2 logical GEO s
                   IBM1S506   DANIS506  USBMSD
           C        993        978      61
           H          2          4      64
           S         63         32      32
 CF 128 MB 




Last changed: 08.08.2007 23:26 by 62.143.44.80 - HomePage Reload page Edit Versions Download HTML

Druckansicht          Startseite  Wikis  USB-Boot (en)  
Vereinstermine