![]() |
![]() |
![]() |
||
| Start | Impressum | Sitemap | Suche | ||||
Druckansicht Startseite Wikis USB-Boot (en)
[Article: Wiki-eCS-OS/2-USB-Boot-en--Chapter Hardware Test Environment | Diskussion ]
Tip: If your coming via link from Google search results to this "SubWiki",
please click here for the Main Wiki
"Howto Boot OS/2 - eCS from USB Mass Storage Devices ( MSD )"
SubWiki: Chapter 6.1: Hardware Test Environment
[Edit]1 Introduction to the SubWiki Chapter 6.1: Hardware Test Environment
IBM ThinkPad T23
UltraBay 2nd HDD Adapter
CF-to-IDE Adapter
USB CF Card Reader One Slot (USB 1,1 ) well the T23 does have only USB 1.1 ports
CF Cards 64 MB , 126 MB, 1 GB
The stuff with the CF-to-IDE Adapter in the UltraBay is test environment!
1. You see more info about your MSD Hardware by using DANIS506 and DiskINFO.
2. You can verify the OS/2 Configuration.
Does it boot via CF-to-IDE adapter and boot manager.
okay, no error
lets do the next step and test it with booting
via USB Card Reader,
USB BIOS support of the computer and
USBMSB I13 support.
[Edit]2 IBM Thinkpad T23IBM ThinkPad T23 Model 2647-9LG Original description: PIII-M 1.13GHz (512KB), 128MB RAM, 48.0GB HDD, IBM Announcement Letter No. ZG01-0385 dated July 31, 2001 Configuration upgraded: Add 512 MB RAM, now system RAM = 640 MB and change the HDD to a 160 GB model
[Edit]2.1 PCI Test Output of the T23 without Dock IIPlease see SubWiki: T23 without Dock II - PCI Test Output [Edit]2.2 PCI Test Output of the T23 with Dock II[Edit]2.3 PCI Test Output of the T23 with Dock II and DC-150 RAID ControllerPlease see SubWiki: T23 with Dock II and DC-150 RAID Controller - PCI Test Output [Edit]3 USB CF Card Reader One Slot
Bild: USB-Boot-USB-Card-Reader-and-64MB-CF-Card.png
[Edit]4 ThinkPad Ultra Bay 2nd HDD Adapter with CF-to-IDE Adapter
Bild: USB-Boot-CF-64-to-IDE.png
Bild: USB-Boot-CF-128-to-IDE.png
Bild: USB-Boot-CF-1-GB-to-IDE-A-DATA
Bild: USB-Boot-1-GB-to-IDE-DANE-ELEC [Edit]5 ThinkPad Dock II with eSATA / SATA Controller in PCI Slot of the Dock IIThe following PCI SATA Controller with external SATA / eSATA Port are tested: [Edit]5.1 DC-150 RAID from Dawicontrol GmbHDC-150 RAID - Serial ATA RAID Controller for SATA devices
* Unterstützt RAID 1, 0 und Backup
* Zwei unabhängige Serial ATA Kanäle
* Ein Kanal wahlweise extern nutzbar
* 150 MByte/s Datentransferrate
Product Details (PDF) from Dawicontrol
The controller BIOS is flashed to the latest non Raid "Base" BIOS
SiI3512 Version 4.3.84 2007-11-26 from Silicon Image Support
[Edit]5.1.1 Howto flash a DC-150 Raid Card in a ThinkPad Dock II PCI slot from factory to latest FirmwarePlease see SubWiki: Howto flash a DC-150 Raid Card in a ThinkPad Dock II PCI slot from factory to latest Firmware
[Edit]5.2 SATA300 TX4302 from Promisehttp://www.promise.com/product/product_detail_eng.asp?product_id=168
Chipname: PDC40718 BIOS: 1.00.0.36 W2K driver Version: 1.0.0.37 2006-03-13 [Edit]5.3 PCI -> Serial ATA RAID controller 2 int. / 2 ext. ports von Vivanco
Chipset: SIL3112 [Edit]6 CF to SATA Adapter
First Test results:
CF card --> CF to SATA converter --> SATA controller DAWI control
DC-150 RAID in Thinkpad Dock II pci extension slot --> Thinkpad T23
work with boot from CF Card
1. without Bootmanager
CF Card is the only active HDD device in BIOS Startup sequence
and the primary partition is set active in the partition table
2. with Bootmanager on the primary HDD of the T23
and LVM Info of the CF partition with Bootmanager Flag
and bootable
[Edit]7 external Boxes with PATA / SATA HDD and USB, Firewire and eSATA Interface[Edit]7.1 KC31-CS from Mapower Electronics Bridge Chipset JMicron JM20316 Model No.
JM20336 Model No.
Interface/Ports * eSATA 1port * USB 2.0 High Speed (USB 1.1 compatible) 1 port Product info: http://www.mapower.com.tw/mapower/Product.asp?CateID=42&LineID=7
SATA HDD connected by the SATA eSATA bridge (JMircon JM20316 or JM20336) are not detected as device by the SIL3512 BIOS (DC-150 RAID Controller) at startup and the DANIS506.add drive does not see the device. The SATA HDD directly connected to the controller is detected by the controller BIOS and the DANIS506 sees the device. Test with W2K and the SIL Windows driver: The driver does not recognise the device too!
System Requirements (PC) * eSATA Plug and Play support required for host card driver
Info form the File Chiplist.txt of the DANIS506 1.8.1 package
0x1095 Silicon Image
0x3112 SiI 3112 Hotplug: yes
0x3512 SiI 3512 Hotplug: ?
Tests ( to do): 1. KC31-CS Box and SIL3112 controller (Vivanco )
2. and Promise controller
Test result with Controller ULTRON US-200 PCMCIA SATA Adapter (Chipset: Sil3112 ) and latest W2K Sil drive The device is not detected by the W2K driver! The KC31-CS connected via USB port at the T23 works!!
[Edit]7.2 Pleiades Super S-Combo from Macpower Bridge Chipset Oxford 924DSb Model No.: PD-SAFBAU2OS
Oxford 934DSb Model No.: PD-SAFBA4U2OS
Interface/Ports * eSATA 1port * FireWire 800 (1394b) 2 ports * FireWire 400 (1394a) 1 port * USB 2.0 High Speed (USB 1.1 compatible) 1 port Product info: http://www.macpower.com.tw/products/hdd3/pleiades/pd_scombo Where to Buy - Europe: MAG The World of Computer Accessories http://www.mag.de/index.html [Edit]8 eSATA to USB Adapter
Druckansicht Startseite Wikis USB-Boot (en) |
Vereinstermine No singlePid defined No HTML template found --> Did you include the static TypoScript template ('News settings') for tt_news? |
|||
![]() | ||||